View TPL802727-193H_8664709.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

november 2013 transponder coils tpl series tpl802727 tpl1183427 tpl1183525 inductors
(2/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors reminders for using these products before using these products, be sure to request the delivery specifications. safety reminders please pay sufficient attention to the warnings for safe designing when using these products. the storage period is less than 12 months. be sure to follow the storage conditions (temperature: 5 to 40c, humidity: 10 to 7 5% rh or less). if the storage period elapses, the soldering of the terminal electrodes may deteriorate. do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150c. soldering corrections after mounting should be within the range of the conditions determined in the specifications. if overheated, a short circuit, performance deterioration, or lifespan shortening may occur. when embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. self heating (temperature increase) occurs when the power is turned on, so the tolerance should be sufficient for the set therm al design. use a wrist band to discharge static electricity in your body through the grounding wire. do not expose the products to magnets or magnetic fields. do not use for a purpose outside of the contents regulated in the delivery specifications. if an ultrasonic process is used, thoroughly check the condition setting in order to prevent disconnection. do not clean the products with solvents. if a potting resin or a moisture-proof coat containing a solvent such as acetone, tolu ene or xylene is used, consult with us in advance. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. if you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) aerospace/aviation equipment (2) transportation equipment (electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications when designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng protection circuit/device or providing backup circuits in your equipment. reminders
(3/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors transponder coils features common in the series transponder coils that ensure hi gh reliability suitable for automotive applications. tpl802727 type coils also realize a small size (8 mm in length) and high inductance (18.52mh max.) achieves stable electrical characteristics due to th eir high srf design structure. tpl802727 type ensures high reliability suitabl e for automotive applications by adopting higher heat resistance wire and welding wire connecti on. tpl1183427, tpl1183525 types it is fully resin-molded. terminals are highly reliable with the spring structure. they show excellen t quality especially in bending and drop resistance. application mainly receiving lf antenna coils for the in-car devices shown below tire-pressure monitoring system (tpms) keyless entry system immobilizer etc. other electronic devices part number construction operating temperature range, package quantity, product weight operating temperature range includes self-temperature rise. overview of the tpl series tpl 802727 - 722 h series name lwh dimensions inductance inductance tolerance (mm) (mh) (%) 802727 8.02.72.7 722 7.2 h 3 1183427 11.83.42.75 j 5 1183525 11.83.52.4 ty p e temperature range package quantity operating temperature storage temperature c c pieces/reel tpl802727 C40 to +125 C40 to +125 2,500 tpl1183427 C40 to +125 C40 to +125 2,500 tpl1183525 C40 to +125 C40 to +125 2,500 product compatible with rohs directive aec-q200 rohs directive compliant product: see the following for more details related to rohs directive compliant products. http://www.t dk.co.jp/rohs/
(4/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series tpl802727 type shape & dimensions recommended land pattern dimensions in mm 7.850.15 2.70.2 1.9 0.8 2.7 +0.3 C0.1 dimensions in mm 2.2 5.3 9.5
(5/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series y tpl802727 type electrical characteristics characteristics specification table this inductance value is an example of the current commercial product.if a different inductance is needed, please contact us. l q measurement frequency (khz) dc resistance ( ) part no. (mh) tolerance min. max. 18.52 3% 40 125 240 TPL802727-193H 7.20 3% 35 125 105 tpl802727-722h 4.91 3% 30 125 85 tpl802727-492h 4.50 3% 30 125 80 tpl802727-452h
(6/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series y tpl802727 type electrical characteristics l frequency characteristics graph q frequency characteristics graph 0 5 10 15 20 25 30 10 100 1000 10000 inductance ( mh ) frequency ( khz ) 193h 722h 492h 452h 125khz 10 0 25 50 75 q 100 1000 10000 frequency ( khz ) 125khz 193h 722h 492h 452h
(7/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series tpl1183427 type shape & dimensions recommended land pattern dimensions in mm 11.80.4 2.750.3 2.4 0.8 3.40.4 dimensions in mm 2.7 9.9 13.5
(8/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series y tpl1183427 type electrical characteristics characteristics specification table this inductance value is an example of the current commercial product.if a different inductance is needed, please contact us. available for an inductance tolerance of less than 5%. measurement equipment ? equivalent measurement equipment may be used. l [125khz] q [125khz] self-resonant frequency (khz) dc resistance ( ) part no. (mh) tolerance typ. typ. typ. 7.20 5% 66 690 50 tpl1183427-722j-720n measurement item product no. manufacturer l, q 4194a+16047e agilent technologies self-resonant frequency 4194a+16047e agilent technologies dc resistance ax-114n adex
(9/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series y tpl1183427 type electrical characteristics l frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. q frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. product no. manufacturer 4194a+16047e agilent technologies product no. manufacturer 4194a+16047e agilent technologies 20 15 0 10 5 inductance ( mh ) 125khz 100 1000 frequency ( khz ) 10 100 80 0 60 20 40 q 100 1000 frequency ( mhz ) 10 125khz
(10/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series tpl1183525 type shape & dimensions recommended land pattern dimensions in mm 11.80.5 2.40.3 3.2 0.8 3.50.4 dimensions in mm 3.5 9.9 13.5
(11/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series y tpl1183525 type electrical characteristics characteristics specification table this inductance value is an example of the current commercial product.if a different inductance is needed, please contact us. available for an inductance tolerance of less than 5%. measurement equipment ? equivalent measurement equipment may be used. l [125khz] q [125khz] self-resonant frequency (khz) dc resistance ( ) part no. (mh) tolerance typ. typ. typ. 2.61 5% 50 650 26 tpl1183525-262j-261n 2.36 3% 53 1100 24 tpl1183525-242y-236n measurement item product no. manufacturer l, q 4194a+16047e agilent technologies self-resonant frequency 4194a+16047e agilent technologies dc resistance ax-114n adex
(12/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series y tpl1183525 type electrical characteristics l frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. q frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. product no. manufacturer 4194a+16047e agilent technologies product no. manufacturer 4194a+16047e agilent technologies inductance ( mh ) 125khz 100 1000 10000 frequency ( khz ) 10 20 15 0 10 5 261n 236n inductance ( mh ) 100 1000 10000 frequency ( khz ) 10 q 125khz 100 80 0 60 20 40 261n 236n
(13/13) 001-01 / 20131101 / e541_tpl.fm ? all specifications are subject to change without notice. inductors tpl series packaging style reel dimensions tape dimensions ty p e a w1 w2 n e tpl802727 ?329+0.5/C1.5 21.41.0 17.41.0 ?1001.0 2 tpl1183427 ?3302.0 24.4+2.0/C0 292.0 ?80 or ?1001.0 2 tpl1183525 ?3302.0 24.4+2.0/C0 292.0 ?80 or ?1001.0 2 dimensions in mm ty p e a b ?d0 e f p0 p1 p2 w k t tpl802727 3.0 8.1 1.5+0.1/C0 1.750.1 7.50.1 4.00.1 8.00.1 2.00.1 16.00.3 2.9 0.3 tpl1183427 3.7 12.1 1.550.05 1.750.1 11.50.1 4.00.1 8.00.1 2.00.1 240.3 3.2 0.3 tpl1183525 3.7 12.1 1.550.05 1.750.1 11.50.1 4.00.1 8.00.1 2.00.1 240.3 2.8 0.3 ?13.0 0.5 ?21.0 0.8 2.0 0.5 a ( 1.0 ) dimensions in mm n e w2 w1 fe w p0p2?d0 p1 a t b k dimensions in mm 160min. taping 200min. 300min. drawing direction dimensions in mm

▲Up To Search▲

Price & Availability of TPL802727-193H

	To Download TPL802727-193H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .